Cold Fogging Diffuser
This diffuser is based on the principle of cold fogging that allows essential oils to be distributed retaining all their therapeutic properties.
In addition to its mass-effectiveness, the other advantage of this method is to generate negative ions that regenerate and purify the air by fighting against microbial attacks and external pollution.
An automatic timer that alternates diffusion time (2 minutes) and pause time (1 minute) and automatic shutdown after 2 hours of broadcast to avoid an overloaded atmosphere.
LED lighting with automatic alternating colors.
Power adjustable depending on the volume of the workpiece (surface area ranging from 10 to 100 m2).
Comfort model (apartment, office, business, waiting room).
- Handcrafted glassware (blown glass reinforced, fine glassware).
- Enhanced Model (apartment, office, business, waiting room ...).
- Varnished wooden base with non-slip sole.
- Standard nebulizer: blown glass.
- The process of diffusion by cold fogging.
- Power: adjustable depending on the volume of the room.
- LED lighting with automatic alternating colors.
- Splash glass cap, protection against dust, soft diffusion.
- Input Voltage transformer 230V / 12V ~ 50Hz.
1. Carefully insert the foot of glassware in the rubber ring in the center the wooden base. 2. Pour a few drops of pure essential oil in the glass without immerse the internal nebulizer (nozzle in vertical axis located in the glass Central to the bottom of the glass) which would cause immediate malfunction of your apparatus.
3. Turn the splash glass cover (optional).
4. Connect the device using the transformer.
5. Turn on the drive by turning knob clockwise. Turn the button to get the speed according to your convenience.
6. To turn off your display, turn the drive knob to the left until full lock (click).
WARNING: DESPITE SECURITY DEVICE THAT CUTS THE OPERATION OF THE EQUIPMENT DO NOT ALLOW THE POWER ON WHEN NOT IN USE OR WHEN THE TANK IS EMPTY.
FOR A COMPLETE STOP, DISCONNECT THE UNIT OF ELECTRICAL OUTLET.